Integrated Conditioning Acquisition & Control System Enclosures
Four enclosures are available as part of the Series 6000 System: Large, Small and two DC powered portables.
Common Enclosure Features
Any number or combination of racks
Over 6 MS/s, simultaneous sampling per system
Multiple, distributed system support
On-board storage for data redundancy
Distributed Sample Clock, Alarm & Calibration Bus
IRIG A, B or G
Supports any I/O module in any slot
The native interface for the enclosure is USB 2.0 and can be configured for Ethernet. There are many ways to configure a system. Multiple racks can be combined to provide a single larger system or used individually to create smaller, lower channel count installations. The systems can be run locally (near a test cell) or remotely from a control room. This allows the test operators to setup, configure and calibrate the system locally near the test article and remotely while a test is in progress.
An Operator’s Workstation is the primary control and data recording point for the Series 6000 System. Typically installed in the control room, the Operator’s Workstation runs PI660 Data Acquisition Software for system setup, calibration, display, recording, distribution and export. Multiple, distributed systems are supported and controlled through a single Operator’s Workstation. A system can even be configured and used over wireless technology, allowing even greater control over the system. For example, a technician can change gain and filter settings on a touch screen tablet style PC while performing system checkouts and test readiness.
Data redundancy is optionally available and mounts on the controller board in each Series 6000 enclosure, creating a redundant recording point for the system. In the unlikely event the Operator’s Workstation or application software fails, data will continue to record in each enclosure and can be recovered from the system post-test.
USB 2.0 Interface provides up to 4.8 MS/s aggregate data rate
Calibration voltage distribution
Alarm busses for control external equipment
Optional remote operation using gigabit Ethernet
Optional on-board data storage
Built-in fans and cable tray
Description
The 6000U enclosure has 16 slots for Series 6000 input and output modules with a Universal Serial Bus (USB 2.0) computer interface for programming, control and data output. For larger systems, up to 32 enclosures may be combined using USB 2.0 hubs or a computer with multiple USB 2.0 ports. The enclosures are 8U 19-inch rack mount. The ...
USB 2.0 Interface provides up to 4.8 MS/s aggregate data rate
Calibration voltage distribution
Alarm busses for control external equipment
Optional remote operation using gigabit Ethernet
Optional on-board data storage
Higher performance, reliability, ruggedness and lower weight
Description
The 6000U-1 enclosure has 16 slots for Series 6000 input and output modules with a Universal Serial Bus (USB 2.0) computer interface for programming, control and data output. For larger systems, up to 64 enclosures may be combined using USB 2.0 hubs or a computer with multiple USB 2.0 ports. The enclosures are ...
USB 2.0 Interface provides 4.8 MS/s aggregate data rate
Calibration voltage distribution
Alarm busses for control of external equipment
Optional remote operation using gigabit Ethernet
Optional on-board data storage
Built-in fans and cable tray
Description
The 6010U enclosure has 4 slots for Series 6000 input and output modules with a Universal Serial Bus (USB2.0) computer interface for programming, control and data output. For larger systems, up to 32 enclosures may be combined using USB 2.0 hubs or a computer with multiple USB 2.0 ports. The enclosures are 3U 19-inch, rack mount or desktop. The ...
USB 2.0 Interface provides 4.8 MS/s aggregate data rate
Calibration voltage input
Alarm busses for control external equipment
Optional remote operation using gigabit Ethernet
Optional on-board data storage
Built-in fans and front mounted connections
Description
The 6005U enclosure has 10 slots for Series 6000 input and output modules with a Universal Serial Bus (USB 2.0) computer interface for programming, control and data output. Multiple enclosures can be combined for larger and/or distributed installations. 6005U is DC operated for mobile applications.
USB 2.0 Interface provides 4.8 MS/s aggregate data rate
Calibration voltage input
Alarm busses for control external equipment
Optional remote operation using gigabit Ethernet
Optional on-board data storage
Built-in fans and front mounted connections
Description
The 6008U enclosure has 4 slots for Series 6000 input and output modules with a Universal Serial Bus (USB 2.0) computer interface for programming, control and data output. Multiple enclosures can be combined for larger and/or distributed installations. 6008U is DC operated for mobile applications.
Ethernet Interface provides up to 4.8 MS/s aggregate data rate
Calibration voltage distribution
Alarm busses for control of external equipment
Optional on-board data storage
Built-in fans and cable tray
Description
The 6000E enclosure has 16 slots for Series 6000 input and output modules with a gigabit Ethernet interface for programming, control and data output. An internal Control & Data Processor (Model 6096) provides an Ethernet interface to the remote Operators Workstation. The 6000E has 5 USB 2.0 connectors on the rear panel. This allows multiple Model 6000U (up to 63) enclosures to be used for ...
Ethernet Interface provides 4.8 MS/s aggregate data rate
Calibration voltage distribution
Alarm busses for control external equipment
Optional on-board data storage
Built-in fans and front mounted connections
Description
The 6005E enclosure has 8 slots for Series 6000 input and output modules with a gigabit Ethernet interface for programming, control and data output. An internal Control & Data Processor (Model 6096) provides an Ethernet interface to the remote Operators Workstation. 6005U is DC operated for mobile applications.
All connections are made on the front allowing the 6005E to be ...
Signal Conditioning & Data Acquisition
Call: 
