Products > Signal Conditioning Systems > Series 6100 Automated Amplifiers > Signal Conditioning Enclosures  
 

Signal Conditioning Enclosures

Series 6100 and 6000 Enclosures are common between the two product lines. Integrated A/D and data rates noted in enclosure specifications apply only to the Series 6000 systems, as 6100 signal conditioning systems are typically used with external A/D. Enclosures are available in a variety of sizes and a selection of AC and DC powered versions to meet the needs of laboratory and portable field applications, accommodating any combination of Series 6100 I/O Modules. With USB 2.0 and Ethernet interfaces available, facility integration couldn’t be easier.

Common Enclosure Features

  • Any number or combination of racks
  • Multiple, distributed system support
  • Supports any I/O module in any slot

The native interface for the enclosure is USB 2.0 and can be configured for Ethernet. There are many ways to configure a system. Multiple racks can be combined to provide a single larger system or used individually to create smaller, lower channel count installations. The systems can be run locally (near a test cell) or remotely from a control room. This allows the test operators to setup, configure and calibrate the system locally near the test article and remotely while a test is in progress.

An Operator’s Workstation is the primary control and data recording point for the Series 6000 System. Typically installed in the control room, the Operator’s Workstation runs PI610 Signal Conditioning Software for system setup, calibration, display, recording, distribution and export. Multiple, distributed systems are supported and controlled through a single Operator’s Workstation. A system can even be configured and used over wireless technology, allowing even greater control over the system. For example, a technician can change gain and filter settings on a touch screen tablet style PC while performing system checkouts and test.


Click on a Product to view details.

6000U

Model 6000U 16-Slot, USB Data & Control Interface Enclosures


Features

  • Enclosure for 16 I/O modules
  • USB 2.0 Interface provides up to 4.8 MS/s aggregate data rate
  • Calibration voltage distribution
  • Alarm busses for control external equipment
  • Optional remote operation using gigabit Ethernet
  • Optional on-board data storage
  • Built-in fans and cable tray

Description

The 6000U enclosure has 16 slots for Series 6000 input and output modules with a Universal Serial Bus (USB 2.0) computer interface for programming, control and data output. For larger systems, up to 32 enclosures may be combined using USB 2.0 hubs or a computer with multiple USB 2.0 ports. The enclosures are 8U 19-inch rack mount. The ...

6000U

Model 6000U-1 16-Slot, USB Data & Control Interface Enclosures


Features

  • Enclosure for 16 I/O modules
  • USB 2.0 Interface provides up to 4.8 MS/s aggregate data rate
  • Calibration voltage distribution
  • Alarm busses for control external equipment
  • Optional remote operation using gigabit Ethernet
  • Optional on-board data storage
  • Higher performance, reliability, ruggedness and lower weight

Description

The 6000U-1 enclosure has 16 slots for Series 6000 input and output modules with a Universal Serial Bus (USB 2.0) computer interface for programming, control and data output. For larger systems, up to 64 enclosures may be combined using USB 2.0 hubs or a computer with multiple USB 2.0 ports. The enclosures are ...

6000U

Model 6000E 16-Slot, Ethernet Data & Control Interface Enclosures


Features

  • Enclosure for 16 I/O modules
  • Ethernet Interface provides up to 4.8 MS/s aggregate data rate
  • Calibration voltage distribution
  • Alarm busses for control of external equipment
  • Optional on-board data storage
  • Built-in fans and cable tray

Description

The 6000E enclosure has 16 slots for Series 6000 input and output modules with a gigabit Ethernet interface for programming, control and data output. An internal Control & Data Processor (Model 6096) provides an Ethernet interface to the remote Operators Workstation. The 6000E has 5 USB 2.0 connectors on the rear panel. This allows multiple Model 6000U (up to 63) enclosures to be used for ...

6005

Model 6005U 10-Slot, 12 VDC, USB Data & Control Interface Enclosures


Features

  • DC Enclosure for 10 I/O Modules
  • USB 2.0 Interface provides 4.8 MS/s aggregate data rate
  • Calibration voltage input
  • Alarm busses for control external equipment
  • Optional remote operation using gigabit Ethernet
  • Optional on-board data storage
  • Built-in fans and front mounted connections

Description

The 6005U enclosure has 10 slots for Series 6000 input and output modules with a Universal Serial Bus (USB 2.0) computer interface for programming, control and data output. Multiple enclosures can be combined for larger and/or distributed installations. 6005U is DC operated for mobile applications.

All connections are made on the ...

6005

Model 6005E 8-Slot, 12 VDC, Ethernet Data & Control Interface Enclosures


Features

  • DC Enclosure for 8 I/O Modules
  • Ethernet Interface provides 4.8 MS/s aggregate data rate
  • Calibration voltage distribution
  • Alarm busses for control external equipment
  • Optional on-board data storage
  • Built-in fans and front mounted connections

Description

The 6005E enclosure has 8 slots for Series 6000 input and output modules with a gigabit Ethernet interface for programming, control and data output. An internal Control & Data Processor (Model 6096) provides an Ethernet interface to the remote Operators Workstation. 6005U is DC operated for mobile applications.

All connections are made on the front allowing the 6005E to be ...

6010U

Model 6010U 4-Slot, USB Data & Control Interface Enclosures


Features

  • Enclosure for 4 I/O modules
  • USB 2.0 Interface provides 4.8 MS/s aggregate data rate
  • Calibration voltage distribution
  • Alarm busses for control of external equipment
  • Optional remote operation using gigabit Ethernet
  • Optional on-board data storage
  • Built-in fans and cable tray

Description

The 6010U enclosure has 4 slots for Series 6000 input and output modules with a Universal Serial Bus (USB2.0) computer interface for programming, control and data output. For larger systems, up to 32 enclosures may be combined using USB 2.0 hubs or a computer with multiple USB 2.0 ports. The enclosures are 3U 19-inch, rack mount or desktop. The ...

© 2022, Pacific Instruments, Inc. Catalog IndexPrivacy PolicySite Map